Straight Line Wire Drawing Machine with Rolling Cassette for Low Carbon High Carbon Steel

Basic Info

Max. Number of Block	14
Certification	ISO
Condition	New
Model	Lz Straight Line Type
Inlet Diameters	8-5.5mm
Output Diameters	2.0-0.8mm
Control	Siemens PLC Control
Suitable Material	Steel, Alloy, Stainless Steel
Transport Package	Plastic Film
Trademark	Wuxi Pingsheng
Origin	Wuxi, China
HS Code	8463102000

Product Description

Straight line wire drawing machine with rolling cassette for low carbon high carbon steel LZ8/600
1. Working range:(1) Inlet diameter: Φ7.0mm(2) Inlet wire tensile strength: <=500Mpa (3) Outlet diameter: Φ2.0mm(4) Total reduction rate: 91.84%(5) Average reduction rate: 22.62%(6) Motor power:37KW2. Machine frame:Design the wire drawing machine frame into the sturdy welded box form, all the raw material (such as steel plate, H-section steel, angle steel, etc. Surface corrosion depth <=0.3mm. Machine base, countertop and vertical panel use thick hot rolled plate cavity, inside of them are fixed by the thick steel plate with reinforcement ribs. Steel plate and profile surface do the rust treatment, eliminate internal stress after welded, then mechanical processing, ensure the frame stability and rigidity, meet the high-speed drawing requirements, ensure that the equipment will not vibration under the high-speed drawing or heavy loading. The inlet, outlet drainage pipe, cables are installed in the internal rack of the machine.

Straight Line Wire Drawing Machine with Rolling Cassette for Low Carbon High Carbon Steel

3. Rolling cassetteThe roller cassette is based on the principle of roll movement, while the traditional die is based on the sliding principle. Therefore, the friction of the rolling cassette is five times less than the die, and the same drawing effect can be achieved with a smaller drawing force.

Straight Line Wire Drawing Machine with Rolling Cassette for Low Carbon High Carbon Steel

(1) 6 Pieces eccentricity axis are oil cooling, and provide suitable lubrication for roller bearing.(2) There are 6 pieces tungsten steel ring, size: 90mm*65mm*15mm(3) Adjustment mode: Adjust the roundness and diameter of the wire by adjusting the toothed block and screw on the projector.(4) Design the oil circulation cooling system, it can effectively provide internal lubrication effect of roller. (5) There is an independent control panel for operation under the capstan, panel with control valve, oil pressure display.

Products

Straight Line Wire Drawing Machine with Rolling Cassette for Low Carbon High Carbon Steel

Basic Info

Product Description